During the "Twelfth Five-Year Plan" period, no new conventional thermal power units and private power plants will be approved; other new projects involving coal consumption must replace coal equivalent as pre-conditions for project approval. On the morning of the 28th, the Jinan City Pollution Pollution Reduction Working Conference posted news that the pollution emission reduction needed to control new volume.
In addition to controlling new projects, all counties (cities), hi-tech zones, and relevant departments must also do a good job in supporting the construction of newly-developed regional sewage treatment facilities and sewage pipe networks to ensure simultaneous completion, simultaneous operation, and reduction of pollutant discharge intensity. Urbanization continues to push forward with new volume pressure. We will continue to implement a pre-approval system for the total discharge of pollutants and link the new projects directly with the emission reduction targets and eliminate backward production capacity. We will strengthen planning and guidance and encourage new sewage projects to be concentrated in industrial parks, and in heat-producing regions, and in key industries such as iron and steel, cement, and petrochemicals.
In urban heating planning, Jinan City will make the best use of the heating capacity of new heat sources such as Huangtai Power Plant, Zhangqihuahua Electric and other large units, and Jinan Iron & Steel's residual heat, and gradually replace small thermal power units. We plan to phase out the thermal power units for overtime service in key industries such as thermal power plants, steel and petrochemical industries, iron and steel sinter machines that cannot reach the required scale, and refinery production lines.
In addition to controlling new projects, all counties (cities), hi-tech zones, and relevant departments must also do a good job in supporting the construction of newly-developed regional sewage treatment facilities and sewage pipe networks to ensure simultaneous completion, simultaneous operation, and reduction of pollutant discharge intensity. Urbanization continues to push forward with new volume pressure. We will continue to implement a pre-approval system for the total discharge of pollutants and link the new projects directly with the emission reduction targets and eliminate backward production capacity. We will strengthen planning and guidance and encourage new sewage projects to be concentrated in industrial parks, and in heat-producing regions, and in key industries such as iron and steel, cement, and petrochemicals.
In urban heating planning, Jinan City will make the best use of the heating capacity of new heat sources such as Huangtai Power Plant, Zhangqihuahua Electric and other large units, and Jinan Iron & Steel's residual heat, and gradually replace small thermal power units. We plan to phase out the thermal power units for overtime service in key industries such as thermal power plants, steel and petrochemical industries, iron and steel sinter machines that cannot reach the required scale, and refinery production lines.
We are manufacturer of Micro USB 3.0 Male in China, if you want to buy Micro USB 3.0 Straddle Type,B Male Straddle Type 0.8mm,MICRO USB 3.0 B MALE please contact us.
USB3.0 is a USB specification, which was initiated by Intel and other companies. The maximum transmission bandwidth of USB3.0 is as high as 5.0gbps (500MB / s).
While maintaining compatibility with USB2.0, USB3.0 also provides enhancements: significantly increased bandwidth (up to 5Gbps full duplex); better power management;
more power; faster device identification; and higher data processing efficiency.
The reason why USB 3.0 has the performance of "speeding" is entirely due to the improvement of technology.
Compared with USB 2.0 interface, USB 3.0 adds more physical buses in parallel mode.
You can pick up a USB Cable and look at the interface.
On the basis of the original 4-wire structure (power supply, ground wire, 2 pieces of data), USB 3.0 adds 4 lines for receiving and transmitting signals.
So there are eight lines in the cable and on the interface.
It is the additional 4 (2 pairs) of lines that provide the bandwidth required for "superspeed USB" to achieve "over speed".
Obviously, two (1 pair) lines on USB 2.0 are not enough.
In addition, in the signal transmission method, the host control mode is still used, but the asynchronous transmission is changed.
USB 3.0 makes use of two-way data transmission mode instead of half duplex mode in USB 2.0 era. In short, data only needs to flow in one direction, which simplifies the time consumption caused by waiting.
In fact, USB 3.0 does not take any rarely heard of advanced technology, but theoretically increases the bandwidth by 10 times. As a result, it is more friendly and friendly. Once superspeed USB products come out, more people can easily accept and make better customized products.
Micro USB 3.0 Male,Micro USB 3.0 Straddle Type,B Male Straddle Type 0.8mm,MICRO USB 3.0 B MALE
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com