ISW horizontal pipeline centrifugal pump was originally used to transport clear water and physicochemical properties similar to clean water. According to market demand, ISW horizontal horizontal centrifugal pump also derived ISWG horizontal hot water pump, ISWH horizontal chemical pump, ISWB horizontal type. The pipeline oil pump is used to transport liquids with different temperatures and different temperatures. It is widely used in different occasions and provides the most suitable products for the technicians of different types of Shanghai Yi pump. The product has good sealing effect, stable operation and low noise. The advantages of low failure rate and other advantages are widely favored by users. The following is a deep analysis of the cause of the failure of the ISW horizontal pipeline centrifugal pump in actual operation and the actual operation method for troubleshooting.
When the ISW horizontal pipeline centrifugal pump has a small amount of water or even no water in the actual use of the user, the cause of the phenomenon and its elimination method are as follows:
1.ISW horizontal pipeline centrifugal pump has a small amount of water, the pressure value does not reach the design pressure, and there are a lot of bubbles floating on the water surface when the water is discharged, which may be caused by the leakage of the inlet pipe. To solve this method, look for the inlet pipe carefully. The leaking point on the top can be sealed.
2. The ISW horizontal pipeline centrifugal pump does not produce water, and at the same time the current of the motor rises sharply and the pump shaft does not rotate. In this case, the impeller in the pump is stuck by the debris, causing the pump shaft to be unable to rotate, and the motor However, it is in the state of power-on. First, the power should be cut off to avoid damage to the pump. Secondly, the debris is removed, and the impeller and the pump casing are cleaned, and then assembled to operate normally.
3. The water volume of the ISW horizontal pipeline centrifugal pump is not up to standard, the pressure is not up to standard, and the current value is only 66% of the normal operating current. This situation is caused by the motor reversal. Contact the electrical related engineer and turn the power supply. Can be solved.High efficient charging speed for Samsung laptop, stable current outlet can offer power for the laptop at the same time charge the laptop battery. The best choice for your replacement adapter. We can meet your specific requirement of the products, like label design. The plug type is US/UK/AU/EU. The material of this product is PC+ABS. All condition of our product is 100% brand new.
Our products built with input/output overvoltage protection, input/output overcurrent protection, over temperature protection, over power protection and short circuit protection. You can send more details of this product, so that we can offer best service to you!
Samsung Adapter,Charger For Samsung,Power Supply For Samsung,Laptop Charger For Samsung
Shenzhen Waweis Technology Co., Ltd. , https://www.huaweishiadapter.com