Model NO.: YJLV22, YJLV23
Certification: ISO, CCC
Model: Yjlv22,Yjlv23
Brand: Jytop
Trademark: JYTOP
Specification: any Third party Pre-shipment inspection
Origin: Zhengzhou, China
HS Code: 8544601200
Model NO.: YJLV22, YJLV23
Certification: ISO, CCC
Model: Yjlv22,Yjlv23
Brand: Jytop
Trademark: JYTOP
Specification: any Third party Pre-shipment inspection
Origin: Zhengzhou, China
HS Code: 8544601200
MIDDLE VOLTAGE 20kv Aluminum Conductor XLPE Insulated Steel Tape Armored Power Cable
12/20kV AL/XLPE/STA/PVC(or PE) Power Cable
1. Description
Construction: Compacted stranded circular aluminum conductor, extruded semi-conducting compound as conductor shield, cross-linked polyethylene (XLPE) insulation, semi-conducting compound as insulation shield, copper tape or combination of copper wire and tape as metallic screen, three cores assembled together with non-hygroscopic polypropylene filler, wrapped with binder tape, PVC inner covering as armoring bedding, double galvanized steel tape armored, PVC or PE outer sheath.
2. Operating Characteristics
Rated voltage U0/U(Um): 12/20(24)kV
U0 is the rated power frequency voltage between conductor and earth or metallic screen for which the cable is designed;
U is the rated power frequency voltage between conductors for which the cable is designed;
Um is the maximum value of the "highest system voltage" for which the equipment may be used.
Max. Permissible continuous operating temperature of conductor: 90 ° C
Max. Temperature of conductor during short-circuit (5s max. Duration) shall not exceed: 250 ° C
The ambient temperature under installation should not be lower than: 0 ° C
The bending radius of cable is recommended as following:
For single core cable: Not less than 20 times of the diameter of cable
For three core cable: Not less than 15 times of the diameter of cable
3. Application
The cable is used for fixed installations such as electric power distribution networks or industrial installations, which is laid indoors, outdoors, in tunnel or in cable trench, unable to bear external mechanical force.
Single core cable in magnetic duct is not permissible.
4. Manufacturing Standards
IEC 60502-2 and Chinese National Standard GB/T 12706-2008 We can produce above cables according to popular international standards such as ASTM, BS, DIN, NF &AS/NZ also.
KINDLY NOTE: If you want to know more details about this kind of products, please visit our website:www.jytopcable.com  for further information.  Thanks.
| Â Size |
Nominal thickness of XLPE insulation(mm) | Approx. thickness of copper tape screen (mm) | Nominal thickness of steel tape(mm) | Nominal thickness of PVC or PE(mm) | Approx. overall diameter of finished cable(mm) | Max. conductor D.C resistance @ 20ºC (Ω/km) |
| 3x35mm 2 | 5.5 | 0.10 | 0.5 | 2.7 | 58.7 | 0.868 |
| 3x50mm 2 | 5.5 | 0.10 | 0.5 | 2.8 | 61.5 | 0.641 |
| 3x70mm 2 | 5.5 | 0.10 | 0.5 | 2.9 | 65.4 | 0.443 |
| 3x95mm 2 | 5.5 | 0.10 | 0.5 | 3.1 | 69.6 | 0.320 |
| 3x120mm 2 | 5.5 | 0.10 | 0.5 | 3.2 | 72.8 | 0.253 |
| 3x150mm 2 | 5.5 | 0.10 | 0.5 | 3.3 | 76.7 | 0.206 |
| 3x185mm 2 | 5.5 | 0.10 | 0.5 | 3.4 | 80.7 | 0.164 |
| 3x240mm 2 | 5.5 | 0.10 | 0.8 | 3.6 | 87.7 | 0.125 |
| 3x300mm 2 | 5.5 | 0.10 | 0.8 | 3.8 | 92.5 | 0.100 |
| 3x400mm 2 | 5.5 | 0.10 | 0.8 | 4.0 | 100.4 | 0.0778 |
MIDDLE VOLTAGE 20kv Aluminum Conductor XLPE Insulated Steel Tape Armored Power Cable
12/20kV AL/XLPE/STA/PVC(or PE) Power Cable
1. Description
Construction: Compacted stranded circular aluminum conductor, extruded semi-conducting compound as conductor shield, cross-linked polyethylene (XLPE) insulation, semi-conducting compound as insulation shield, copper tape or combination of copper wire and tape as metallic screen, three cores assembled together with non-hygroscopic polypropylene filler, wrapped with binder tape, PVC inner covering as armoring bedding, double galvanized steel tape armored, PVC or PE outer sheath.
2. Operating Characteristics
Rated voltage U0/U(Um): 12/20(24)kV
U0 is the rated power frequency voltage between conductor and earth or metallic screen for which the cable is designed;
U is the rated power frequency voltage between conductors for which the cable is designed;
Um is the maximum value of the "highest system voltage" for which the equipment may be used.
Max. Permissible continuous operating temperature of conductor: 90 ° C
Max. Temperature of conductor during short-circuit (5s max. Duration) shall not exceed: 250 ° C
The ambient temperature under installation should not be lower than: 0 ° C
The bending radius of cable is recommended as following:
For single core cable: Not less than 20 times of the diameter of cable
For three core cable: Not less than 15 times of the diameter of cable
3. Application
The cable is used for fixed installations such as electric power distribution networks or industrial installations, which is laid indoors, outdoors, in tunnel or in cable trench, unable to bear external mechanical force.
Single core cable in magnetic duct is not permissible.
4. Manufacturing Standards
IEC 60502-2 and Chinese National Standard GB/T 12706-2008 We can produce above cables according to popular international standards such as ASTM, BS, DIN, NF &AS/NZ also.
KINDLY NOTE: If you want to know more details about this kind of products, please visit our website:www.jytopcable.com  for further information.  Thanks.
| Â Size |
Nominal thickness of XLPE insulation(mm) | Approx. thickness of copper tape screen (mm) | Nominal thickness of steel tape(mm) | Nominal thickness of PVC or PE(mm) | Approx. overall diameter of finished cable(mm) | Max. conductor D.C resistance @ 20ºC (Ω/km) |
| 3x35mm 2 | 5.5 | 0.10 | 0.5 | 2.7 | 58.7 | 0.868 |
| 3x50mm 2 | 5.5 | 0.10 | 0.5 | 2.8 | 61.5 | 0.641 |
| 3x70mm 2 | 5.5 | 0.10 | 0.5 | 2.9 | 65.4 | 0.443 |
| 3x95mm 2 | 5.5 | 0.10 | 0.5 | 3.1 | 69.6 | 0.320 |
| 3x120mm 2 | 5.5 | 0.10 | 0.5 | 3.2 | 72.8 | 0.253 |
| 3x150mm 2 | 5.5 | 0.10 | 0.5 | 3.3 | 76.7 | 0.206 |
| 3x185mm 2 | 5.5 | 0.10 | 0.5 | 3.4 | 80.7 | 0.164 |
| 3x240mm 2 | 5.5 | 0.10 | 0.8 | 3.6 | 87.7 | 0.125 |
| 3x300mm 2 | 5.5 | 0.10 | 0.8 | 3.8 | 92.5 | 0.100 |
| 3x400mm 2 | 5.5 | 0.10 | 0.8 | 4.0 | 100.4 | 0.0778 |
Electric Blanket Switch is one of the most important parts for Electric Blanket, in order to control the quality, we establish the switch industry chain. From material choice to the finished product testing, we concerned a lot!
We have 0-1-2 settings controller, 0-1-2-3-0 settings controller, timer controller, WIFI controller, multi-heating zone controller with fixed or detachable connector.
Key part of the switch
1.Current fuse and thermal link are imported from Taiwan or Japanese company, very reliable quality.
2.Resistor: we choose the metal film instead of carbon film to improve its stablity.
3.PCB: Antiflaming material to guarantee the safety
4.Supply cord: Power cord and interconnection cord are meet VDE standard, 10000 times bending test.
5.Switch shell:â… class original material ABS from Taiwan.
6.Complete produce process and testing system.
7. 100% life test.
Electric Blanket Switch
Electric Blanket Switch,Safety Switch For Electric Blanket,Electric Blanket With Led Switch,Safe Electric Blanket Switch
SHIJIAZHUANG BEIJIREN ELECTRIC APPLIANCE CO., LTD. , http://www.beijirenelectricblanket.com