Daily maintenance and safety attention of temperature control and humidity control box
Temperature control and humidity box
The full name "constant temperature and humidity test chamber" is an essential test equipment for aviation, automotive, home appliances, scientific research, etc., used to test and determine the temperature of high temperature, low temperature, damp heat or constant test of electrical, electronic and other products and materials. Parameters and performance after environmental changes, it is mainly used to be divided into "desktop" and "vertical" according to test requirements and standards. The difference is that the temperature and humidity can be different, and the vertical can be used for low temperature below normal temperature. Dry, desktop can only be used above normal temperature and high humidity.
Daily maintenance:
1
Temperature control and humidity box After each use, the equipment should be cleaned up and the maintenance record should be filled in for the next inspection.
2 Check the screws at each joint for looseness after each use, and reinforce it in time to wipe the oil and dust on the body.
3 During use, always pay attention to the water level of the water tank and the water in the water storage bottle to avoid burning the heater in the water tank due to water cut.
4 Always check that the humidification pump and nozzle are working properly.
Safety note:
1 Do not break water in the tank and in the water tank.
2 Under no circumstances should the instrument be tilted more than 30 degrees.
3 Voltage fluctuations exceeding 10% should use a voltage regulator.